Majhengg S6909ZZ S6909Z Thin Section Bearing (5PCS) ABEC-1 440C

Majhengg S6909ZZ S6909Z Thin Section Bearing (5PCS) ABEC-1 440C

Majhengg S6909ZZ S6909Z Thin Section Bearing (5PCS) ABEC-1 440C

Majhengg S6909ZZ S6909Z Thin Section Bearing (5PCS) ABEC-1 440C:and if we have any special offers or alternatives that we think might be better suited we'll get in touch to discuss the options with you. classic,luxury,max 79% offMajhengg S6909ZZ S6909Z Thin Section Bearing (5PCS) ABEC-1 440C
|||

Product description

WHY 440C STAINLESS steel?

Good corrosion resistance to water and many weak chemicals
Corrosion resistance can be improved by passivation
Good for temperatures up to 300°C

Slightly softer than chrome steel so lower load ratings
Will corrode in salt water or salt spray and poor resistance to acids/alkalis
More expensive than chrome steel

TECHNICAL SPECS

Item: S6909ZZ
Structure: Deep Groove
Material: 440C Stainless Steel ( prefix "S" )
Bore Dia (d): 45 mm
Outer Dia (D): 68 mm
Width (B): 12 mm
Closures: Metal Shielded(ZZ)
Lubrication: Grease
Magnetic: little
Hardness: 58HRC
Corrosion Resistance: General
Clearance: C0
Grades: ABEC Grades 1
Dynamic Load Rating (Cr) (Newtons): 14100
Static Load Rating (Cor) (Newtons): 10830
Ball Qty: 15
Ball Dia (Dw): 8.747 mm
Weight: 147 g
Quantity: 1 Lot = 5 PCS

What is 440C?

A martensitic stainless steel. It's composed of these major alloy elements (I don't list the minor elements since they don't play a major role):
Carbon: 0.95-1.25% This increases hardenability and wear resistance, but decreases toughness in higher amounts.
Manganese: 45% This is added to reduce brittleness and improve forgeability, hardenability, and reducing deformation.
Silicon: 30% This is a deoxidizer and improves hot-forming properties.
Chromium: 17.00-18.00% Added only to high alloy tool steels, this improves hardenability, high wear resistance, toughness, and corrosion resistance.
Molybdenum: 50% Improves deep hardening and toughness.

These basic elements (along with iron) are a simple combination that works well together, and has for many decades.
This alloy is technically classified as UNS (Unified Numbering System) S44044. It's also classified as SAE (Society for Automotive Engineers) as 51440C."br"The American Iron and Steel Institute classifies it as 440C martensitic st

Boiled Peanuts 2x5 Banner sign Full ColorHeyiarbeit Weld on Door Hinge 2.17"x0.63" Home Gate Door WindowBemis Toilet Seat Molded White White Round RoundSt. Tropez Liquor DecanterVibrạtor Sex Doll Flesh Lightsex Toy Bụllet Vibrạ
Parking Garage SWOT Analysis Plus Business Plan
Caltric Fan Heat Sensor Switch Compatible With Polaris Sportsman
mxuteuk 200Pcs Butt Splice Crimp Connectors Insulated Electrical
Tropical Fruits-Dried Mangoes-Slices, 2 lb
Jack-o-Lantern Stacking 4-Pack Mug Set Standard

Majhengg S6909ZZ S6909Z Thin Section Bearing (5PCS) ABEC-1 440C

XJJZS Push Up Bars Strength Training-Slip Sturdy Structure PortaSoapow Men Women Unisex Wool Hat Winter Cycling Warm Cap Face EaUxcell a14010800ux0112 3.2cm x 100cm Round Flexible Tube MachineLovejoy Hydraulics Reservoir Assembly, Aluminum, 17 Gallon CapacOBrien Pro Skin Waterski Gloves
Wishrocks 14K Gold Over Sterling Silver Adjustable Roses Toe Rin
Cowboy Hats Classic Wide Brim Panama Fedora Hat Wool Jazz Hat Da
AUTMATCH Shackles 3/4" D Ring Shackle (2 Pack) 68,000Ibs Break S
Afedee Bias Tape Makers Fabric Sewing Set 6MM/9MM/12MM/18MM/25MM
Spice Hunter, Chinese 5 Spice, 1.6 oz

Majhengg S6909ZZ S6909Z Thin Section Bearing (5PCS) ABEC-1 440C

Majhengg S6909ZZ S6909Z Thin Section Bearing (5PCS) ABEC-1 440C:and if we have any special offers or alternatives that we think might be better suited we'll get in touch to discuss the options with you. classic,luxury,max 79% offMajhengg S6909ZZ S6909Z Thin Section Bearing (5PCS) ABEC-1 440C